2024 ASV Skid Steers VS-75

Information

2024 ASV Skid Steers VS-75

Impossible to Slow You Down

Created with the kind of technology you expect from ASV, this machine was born to be productive. It features industry-leading speed and ground clearance so you can get work done without worrying about running into stumps, rocks and other jobsite obstacles. The VS-75 is built to do a lot without slowing down at all.

POWER

The VS-75 gets up to 11 mph with an optional two-speed drive. The engine powering the machine is a 2.9-liter, 74-horsepower diesel engine that kicks out 192 foot-pounds of torque. The Tier 4 Final engine technology eliminates the need for regeneration, exhaust sensors and diesel exhaust fluid.

Features may include:

POWER
  • The VS-75 gets up to 11 mph with an optional two-speed drive. The engine powering the machine is a 2.9-liter, 74-horsepower diesel engine that kicks out 192 foot-pounds of torque. The Tier 4 Final engine technology eliminates the need for regeneration, exhaust sensors and diesel exhaust fluid.
PERFORMANCE
  • This reliable system is composed of large lines, hydraulic coolers and direct-drive pumps. With the optional high-flow auxiliary hydraulic system the engine won’t lose power when running attachments. As an additional option, the VS-75 delivers flow of 30.9 gallons per minute and a system pressure of 3,335 pounds per square inch. This machine comes with standard hydraulic stick controls and quick-attach for attachments.
COMFORT
  • Built with a next-generation MAX-Series cab, the VS-75 features plenty of creature comforts that let operators work more comfortably for longer periods of time: more all-around space, improved ergonomics, an upgraded HVAC system for better circulation and defrosting, standard joystick controls and an optional all-weather pressurized cab for a cleaner operator environment.

Photos

Highlights

  • Spokane, Washington
  • 2024
  • ASV
  • Skid Steers VS-75
  • Diesel
  • Available
  • 72 in. | Outside Tire: 72 in.
  • Bucket Pin: 130 in. | Dump at Bucket Discharge: 100 in. | Maximum Dump Angle at Full: 39 Degrees | Arm-Up: 125 in | Machine: 84 in

Specifications

  • 2024
  • ASV
  • Skid Steers
  • VS-75
  • General
  • 177 in.3
  • 74.2 hp | Gross: 74.2 hp
  • Peak: 192 ft-lb
  • Engine Coolant: 5 gal
  • Controls: USA and Canada
  • 34-cylinder
  • Diesel
  • Loader Arms: Vertical | Upgradeable Wiring Harness | ROPS/FOPS: Meets ISO 3471, ISO 6683, ISO 3449 | Loader Control: Right-hand pilot hydraulic joystick controls loader lift/tilt, with variable control of aux hyd | Diesel 4-cylinder, Turbocharged Deutz TD2.9L4, Mechanically-Driven Fan and Coolant, Anti-Freeze Filled Radiator Cooling System, Dual Stage Intake Air Cleaner, Block Heater | Multifunctional Display: Fuel, Tachometer, Engine Temperature, Engine Hours, Battery, Two Speed, Hydraulic Temperature, Water Temperature, Engine Oil Pressure, Engine Hours, Trip Hours, and Multiple Languages
  • 800 CCA
  • Normal Charge: 12 V | Convenience: 12 V power port | Port Outlet (Inside Operators Cab): 1 - 12V
  • 95 amp alternator
  • Max. Travel with 2: 11 mph
  • Auxiliary Pump Capacity: 26 gpm
  • System: 3335 psi
  • Engine Including: 9 quarts
  • Dump Reach at Bucket Discharge: 36 in. | Rear Angle of Departure: 24 Degrees | Bucket Roll Back at Ground Level: 30 Degrees | Flat Faced Couplers: 5/8 inch | Chain Size: 100 ANSI | Wheel Size: 12' x 16.5 in. | Wheel Base: 49 in.
  • Unloaded 10.5 in. / Loaded 10 in.
  • Bucket Pin: 130 in. | Dump at Bucket Discharge: 100 in. | Maximum Dump Angle at Full: 39 Degrees | Arm-Up: 125 in | Machine: 84 in
  • Full: 145 in
  • With Bucket: 146 in.
  • 18 in.
  • On Ground: 59 in.
  • Wheel: 10 in. | Front and Rear: 15'' | Mid-Rollers: 10''
  • 72 in. | Outside Tire: 72 in.
  • Rated Operating Capacity @ 50%: 3500 lbs | Tipping Load: 7000 lbs
  • Fuel: 28 gal | Hydraulic: 10 gal
  • Operating: 8910 lbs | Tractive Effort: 8800 lbs
  • Illumination: 2 Forward Facing Lights, 2 Rear Facing Lights