2021 Takeuchi Track Loader TL12R2
The TL12R2 features a radial lift loader arrangement and sets another benchmark for compact track loaders by delivering one of the most capable and innovative machines available to the market today. The cab has been completely redesigned and enlarged and now features a smooth low effort overhead door design for improved entry and egress. A quiet ride track design with flotation pads reduces vibration, noise levels, and improves ride quality.
Features may include:
Engine
- EPA Final Tier 4 Emission Compliant
- Turbocharged and Intercooled
- DOC+DPF+SCR Exhaust After Treatment
- Automatic Fuel Bleed System
- Active Power Control Power Management System
- Working Modes - Power and ECO
- Dual Element Air Filter
- High Capacity Radiator, Hydraulic Oil Cooler and Intercooler Mounted Side-by-Side on Swing Out Frame
ELECTRICAL
- Sealed Rocker Switches
- 12 volt System with 80 amp Alternator
- LED: Two Front and Two Rear
- Engine Preheat
- Hour Meter
- Back-up Alarm
- Horn
UNDERCARRIAGE AND FRAME
- Double Reduction Planetary Drives
- Permanently Sealed Track Rollers with Metal Face Seals
- Fully Welded Frame with Integrated Cross Members
- 2 Speed Travel
- 17.7" Rubber Track
- Grease Type Track Adjuster
- Front and Rear Tie-Down Points and Lift Points
- Rear Bumper Integrated into Frame
OPERATOR'S STATION
- 5.7" Color Multi-Informational Display with Rear Camera
- Tilt-up Operator's Station
- Deluxe High Back Suspension Seat
- Rear Pivoting Lap Bar with Arm Rest
- ROPS / FOPS Structure
- Dial Throttle Control
- Retractable 2" Seat Belt
- Foot Throttle
- Polycarbonate Door and Top Guard (High Flow Only)
HYDRAULIC & WORKING EQUIPMENT
- Hydraulic Pilot Controls
- Boom Float with Detent
- Cushioned Boom Cylinders
- Proportional Auxiliary Controls with Detent
- Hydraulic Self Leveling
- Pressure Relieving Flat Faced Coupler Body
- High Capacity Steel Hydraulic Tank
- 14-Pin Connector with Push Button Control
- Mechanical Quick Coupler
- Hydraulic Quick Coupler Cab - Standard Equipment
- Primary Flow Auxiliary Hydraulics 23.2 gpm
- 2021
- Takeuchi
- Track Loader
- TL12R2
- Compact
- Kubota / V3800TIF4B-Turbo Intercooled
- Horsepower @ 2,400 rpm: 111.3 hp (83.0 kW)
- Maximum @ 1,500 rpm: 276 ft-lb (374 Nm)
- 19.0 qt (18.0 L)
- 230 cu in (3.8 L)
- 13.9 qt (13.2 L)
- 80 amp
- 12 volt
- Bucket Breakout Force: 8,210 lb (3,722 kg) | Lift Arm Breakout Force: 8,075 lb (3,663 kg) | Traction Force: 14,010 lb (6,353 kg)
- Travel - Low: 5.0 mph (8.1 km/hr) | Travel - High: 7.3 mph (11.8 km/hr)
- Auxiliary - Primary Circuit: 23.2 gpm (88.0 Lpm)
- Canopy: 4.58 psi (31.6 kPa) | Cab: 4.68 psi | (32.3 kPa)
- Hydraulic System: 3,481 psi (24.0 MPa)
- Dump Reach Fully Raised: 3 ft 1.8 in (960 mm) | Dump Angle: 42° | Rollback Angle: 30° | Departure Angle: 30° | Clearance Circle with Bucket: 8 ft 4.6 in (2,555 mm) | Clearance Circle without Bucket: 5 ft 4.4 in (1,635 mm) | Clearance Circle Rear: 6 ft 0 in (1,829 mm) | 17.7" Rubber Track
- Max. to Bucket Pin: 10 ft 6.0 in (3,200 mm)
- Dump Fully Raised: 7 ft 10.5 in (2,400 mm) |
- 13 ft 3.3 in (4,045 mm)
- Ground Contact: 5 ft 7.5 in (1,716 mm)
- 7 ft 7.0 in (2,311 mm)
- 17.7 in (450 mm)
- without Bucket: 6 ft 5.2 in (1,960 mm)
- Machine: 10 ft 6.2 in (3,205 mm)
- 12.5 in (320 mm)
- Tipping: 8,629 lb (3,915 kg) | Operating @ 50% of Tip: 4,315 lb (1,957 kg)
- Tank: 31.6 gal (119.5 L) | Consumption (65% of Full Load): 3.8 gal/hr (14.4 L /hr) | DEF Fluid: 4.8 gal (18.0 L)
- Reservoir: 13.2 gal (50.0 L) | System: 22.5 gal (85.0 L)
- Operating - Canopy: 12,300 lb (5,580 kg) | Operating - Cab: 12,590 lb (5,710 kg) | Rated Operating Capacity (ISO 14397-1) @35%*: 2,975 lb (1,349 kg)
- 5.7" Color Multi-Informational Display with Rear Camera | Retractable 2" Seat Belt
- 412003569
- $57,865.00
- Spokane Valley
- Pre-Owned
- SID-24577
- 2021
- Takeuchi
- Track Loader TL12R2
- 412003569
- 1693
- Available
- Dump Fully Raised: 7 ft 10.5 in (2,400 mm) |
- 412003569